Крафтовые полы из натурального дерева

Engineering board and Solid wood UNDERWOOD Deep Natural - UC-L/N-37

Engineer in kind Solid in kind

Decor Options Deep Natural

Width 110, 130, 150, 175, 185mm
Width (solid wood) 110, 120, 130, 150mm
Length 400-2400mm
Length (solid wood) 400-2000mm
Processing Polishing
Coating Varnish
Wood species Oak
Chamfer V4
Quantity stripes Single stripe
Selection options (for engineering board) Hill, Mount, Plain
Selection options (for massive board) Cliff, Hill, Mount, Plain
Country Collection
Vendor code: UC-L/N-37
Default Width: 150mm
Buy UNDERWOOD Deep Natural
UNDERWOOD floor coverings are produced within 20-30 days depending on the decor and production volume. Before production starts, a sample is made for approval.

Floor coverings made of natural wood UNDERWOOD is a combination of beauty, style and quality.

UNDERWOOD solid board is made from oak, and oak is the most durable and durable type of wood.


Engineering Board or American Two-Ply has a valuable 4mm oak ply on high-strength plywood, making it an incredibly stable construction.

UNDERWOOD flooring specification

Инженерка-шип-паз.jpg American two-layer board, tenon-groove connection Инженерка-замковая.jpg American two-layer board, lock connection
Инженерка-HDF--замковая.jpg European HDF three-layer board, lock connectionе Массив-шип-паз.jpg Solid board tenon-groove connection

Nominal parameters of floor coverings

Indicators name Nominal dimensions Permissible variation
Width W, mm ±0.3
Thickness H, mm ±0.2
Valuable layer thickness h, mm ±0.2
Length L, mm ±1.0
Type of flooring Connection type
American two-layer board (engineering board) Longitudinal
End connection
Tenon-groove, Lock
Tenon-groove, Lock
European HDF three-layer board (engineering board on HDF) Longitudinal
End connection
Solid board Longitudinal
End connection

Limit deviations from nominal parameters

Indicators name Permissible variation
Thickness deviation ±0.2 mm
Width deviation ±0.3 mm
Length deviation ±0.5 mm
Perpendicularity of adjacent edges ±0.2% of width W
Transverse curvature (concavity, convexity) ±0.2% of width W
Longitudinal curvature (concavity, convexity) ±1.0% of length L
Longitudinal curvature along the edge ±1.0% of length L
The difference between adjacent boards no more than 0.2 mm
Average value of valuable layer thickness ± 0.2 mm
Humidity solid board 8 ± 2%
Country Collection